Description

Cisco Nexus 3064-X Switch Price in Bangladesh.

The Cisco Nexus® 3064-X, 3064-T, and 3064-32T Switches are high-performance, high-density Ethernet switches that are part of the Cisco Nexus 3000 Series Switches portfolio. These compact one-rack-unit (1RU) form-factor 10 Gigabit Ethernet switches provide line-rate Layer 2 and 3 switching. They run the industry-leading Cisco® NX‑OS Software operating system, providing customers with comprehensive features and functions that are widely deployed globally. They support both forward and reverse airflow schemes with AC and DC power inputs. The Cisco Nexus 3064 switches are well suited for data centers that require cost-effective, power-efficient, line-rate Layer 2 and 3 top-of-rack (ToR) switches.

● Cisco Nexus 3064-X (Figure 1): This 10-Gbps Enhanced Small Form-Factor Pluggable (SFP+)-based top‑of-rack switch has 48 SFP+ ports and 4 Quad SFP+ (QSFP+) ports. Each SFP+ port can operate in 100-Mbps, 1-Gbps, or 10-Gbps mode, and each QSFP+ port can operate in native 40-Gbps or 4 x 10-Gbps mode. This switch is a true phy-less switch that is optimized for low latency and low power consumption.

●   Cisco Nexus 3064-T (Figure 2): This 10GBASE-T switch has 48 10GBASE-T RJ-45 ports and 4 QSFP+ ports. This switch is well suited for customers who want to reuse existing copper cabling while migrating from 1-Gbps to 10-Gbps servers.

●   Cisco Nexus 3064-32T (Figure 2): This switch is the Cisco Nexus 3064-T with 32 10GBASE-T ports and 4 QSFP+ ports enabled. The ports are enabled through software licensing. This switch provides a cost-effective solution for customers who require up to 32 10GBASE-T ports per rack. This switch comes with a 32-10GBASE-T port license preinstalled. To enable the remaining 16 10GBASE-T ports, the customer installs the 16-port upgrade license.

Description

Specification

Physical

●  1RU fixed form factor
●  Cisco Nexus 3064-X: 64 10 Gigabit Ethernet ports (48 SFP+ and 4 QSFP+)
◦   48 SFP ports support 1 and 10 Gigabit Ethernet
◦   4 QSFP ports support 4 x 10 Gigabit Ethernet or 40 Gigabit Ethernet each
●  Cisco Nexus 3064-T: 64 x 10 Gigabit Ethernet ports (48 10GBASE-T and 4 QSFP+)
◦   48 RJ-45 ports support 100 Mbps and 1 and 10 Gigabit Ethernet
◦   4 QSFP ports support 4 x 10 Gigabit Ethernet or 40 Gigabit Ethernet each
●  Cisco Nexus 3064-32T: 48 x 10 Gigabit Ethernet ports (32 10GBASE-T and 4 QSFP+)
◦   32 RJ-45 ports support 100 Mbps and 1 and 10 Gigabit Ethernet
◦   4 QSFP ports support 4 x 10 Gigabit Ethernet or 40 Gigabit Ethernet each
●  2 redundant power supplies
●  1fan tray with redundant fans
●  1 I/O module with management, console, and USB flash memory ports

Performance

●  1.28-Tbps switching capacity
●  Forwarding rate of 950 mpps
●  Line-rate traffic throughput (both Layer 2 and 3) on all ports
●  Configurable maximum transmission units (MTUs) of up to 9216 bytes (jumbo frames)

Hardware tables and scalability

MAC addresses

128,000

Number of VLANS

4096

Spanning-tree instances

●  Rapid Spanning Tree Protocol (RSTP): 512
●  Multiple Spanning Tree (MST) Protocol: 64

ACL entries

●  2000 ingress
●  1000 egress

Routing table

●  16,000 prefixes and 16,000 host entries*
●  8000 multicast routes*

Number of EtherChannels

64 (with vPC)

Number of ports per EtherChannel

32

Buffers

9 MB shared

Boot flash memory

2 GB

Power

Number of power supplies

2

●  Cisco Nexus 3064-X: Redundant for AC and DC power
●  Cisco 3064-T and 3064-32T: Redundant for AC power

Power supply types

●  AC (forward and reversed airflow)
●  DC (forward and reversed airflow)

Typical operating power

●  Cisco Nexus 3064-X
◦   143 watts (W; 64p with Twinax at 100% load; 2 power supply units [PSUs])
◦   177W (64p with SR optics at 100% load; 2 PSUs)
●  CiscoNexus 3064-T
◦   362W (48p with 3m cables; 4 SR4 at 100% load)

Maximum power

●  Cisco Nexus 3064-X: 199W
●  Cisco Nexus 3064-T

AC PSUs

●  Input voltage
●  Frequency
●  Efficiency
●  100 to 240 VAC
●  50 to 60 Hz
●  89 to 91% at 220V

DC PSUs

●  Input voltage
●  Maximum current
●  Efficiency
●  -40 to -72 VDC
●  33A
●  85 to 88%

Typical heat dissipation

●  Cisco Nexus 3064-X
◦   488 BTU/hr (64p with Twinax at 100% load; 2 PSUs)
◦   605 BTU/hr (64p with SR optics at 100% load; 2 PSUs)
●  Cisco Nexus 3064-T
◦   1235 BTU/hr (48p with 3m cables; 4 SR4 at 100% load)

Maximum heat dissipation

●  Cisco Nexus 3064-X: 683 BTU/hr
●  Cisco Nexus 3064-T: 1553 BTU/hr

Cooling

Forward and reversed airflow schemes:

●  Forward airflow: Port-side exhaust (air enters through fan-tray and power supplies and exits through ports)
●  Reversed airflow: Port-side intake (air enters through ports and exits through fan-tray and power supplies)

Single fan tray with redundant fans

Hot swappable (must swap within 1 min)

Sound

Measured sound power (maximum)

●  Fan speed: 40% duty cycle
●  Fan speed: 60% duty cycle
●  Fan speed: 100% duty cycle
●  59.7 dBA
●  66.4 dBA
●  71.0 dBA

Environment

Dimensions (height x width x depth)

●  Cisco Nexus 3064-X: 1.72 x 17.3 x 19.7 in. (4.4 x 43.9 x 50.5 cm)
●  Cisco Nexus 3064-T and 3064-32T: 1.72 x 17.3 x 22.45 in.(4.4 x 43.9 x 57.0 cm)

Weight

●  Cisco Nexus 3064-X: 20.5 lb (9.3 kg)
●  Cisco Nexus 3064-T and 3064-32T: 20.8 lb (9.5 kg)

Operating temperature

32 to 104°F (0 to 40°C)

Storage temperature

-40 to 158°F (-40 to 70°C)

Operating relative humidity

●  10 to 85% noncondensing
●  Up to 5 days at maximum (85%) humidity
●  Recommend ASHRAE data center environment

Storage relative humidity

5 to 95% noncondensing

Altitude

0 to 10,000 ft (0 to 3000m)

Reviews

There are no reviews yet.

Be the first to review “Cisco Nexus 3064-X 10G SFP Switch”

Your email address will not be published. Required fields are marked *